nitroOBD2 - 35% Lagi Power & 15% Jimat Petrol

[ORIGINAL] Nitro OBD2 Plug and Drive Chip Tuning Box Increase Engine Performance for Petrol and Diesel (35% More Power and 25% More Torque)

What is NitroOBD2 Chip Tuning Box?

• This NitroOBD2 device is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the engine performance or save fuel and lower the emission of your car.
• When it plugged into OBD2 connector, NitroOBD2 device receives the information from the car computer ECU. With the received data from ECU,
• NitroOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car.
• NitroOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine.
• NitroOBD2 finds out the hidden power of your car. NitroOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting.
• NitroOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug NitroOBD2 from OBD2 connector.

Features:

• NitroOBD2 increase the engine performance, 35% more power and 25% more torque
• Easy to use, simply plug into OBD2 connector of your car
• The best and optimal for your car
• Even the parameters are different for each vehicle, there not be a need to make an additional adjustment.
• Works on the basis of changing the signal form ECU.
• As a consequence, it changes the whole injection map.
• The main difference between NitroOBD2 Chip Tuning Box and Remapping tuning methods is that NitroOBD2 Chip Tuning Box is easily removable, and after unplug you go back to the factory settings. NitroOBD2 is the cheap and safe type of tuning.
• NitroOBD2 is equipped with the engine protection function and 100% safe for your car engine.
• NitroOBD2 produced on the printed circuit board in SMD technology.
• NitroOBD2 Chip Tuning Boxes are high quality.
• 2 Year Warranty (30 Day Money Back Guaranty)
• Made in Turkey Assemble in China

Installation:

1. Pull the Car Key out from the ignition.
2. Find OBD2 connector(*) in your car and Plug in the NitroOBD2
3. Insert the key into the ignition and twist the key in the first stage. (Do not start the car engine)
4. Press the reset button about 5 sec. After releasing the button, just wait for a while about 30-60 sec. (NitroOBD2 will communicate and estabish connection with ECU)
5. Start up the car engine.
6. NitroOBD2 will recognize your vehicle and your driving habits, after around 200 KM/ 150 Miles driving and thus NitroOBD2 will adjust itself to match your car perfectly for more fuel saving.